Some functional equations originating from number theory

We will introduce new functional equations (3) and (4) which are strongly related to well-known formulae (1) and (2) of number theory, and investigate the solutions of the equations. Moreover, we will also study some stability problems of those equations.     

ON THE COHOMOLOGY OF GENERALIZED RESTRICTED LIE ALGEBRAS

0.IntroductionThispaperisaimedatdevelopingthecohomologytheoryofmodularLiealgebrasandthendeterminingthefirstcohomologygroupsofCartantypeLiealgebras.AsgeneralizationoftheconceptofrestrictedLiealgebras,ageneralizedrestrictedLiealgebra(GRLiealgebra)wasintroducedin[21],whichisassociatedwithabasisandamappingofthebasisintotheLiealgebrasatisfyingthegeneralized-restrictednessconditions.Generalizedrestrictedrepresentations(GRrepresentations)werethenintroduced,whichcanbereducedtotherepresentationsofa…     

Bi3+和Eu3+在Ca2SiO4中的发光和能量传递

用高温固态反应合成了Ca2SiO4:Bi3+,Ca2SiO4:Eu3+和Ca2SiO4:Eu3+,Bi3+发光体。讨论了不同掺杂量和掺杂种类时Bi3+对Eu3+的5D0-7F1,5D0-7F2发射的影响规律。实验发现,Ca2SiO4:Bi3+在紫外线激发下发出明亮的蓝色光,Ca2SiO4:Eu3+,Bi3+中的Bi3+能将激发能传递给Eu3+,使Eu3+的5D0-7F1和5D0-7F2两种跃迁都大大加强,同时,Bi3+也发出鲜艳的紫色光。     

造纸污泥与废水污泥流化床焚烧时NO_x和SO_2的排放特性研究

1前言流化床焚烧污犯是近年来发达国家广泛采用的方法，它能很好地实现污泥的稳定化、无害化、减容化和资源化处理。燃煤流化床锅炉污染物排放方面已做了大量的研究工作，由于污泥与煤在结构和性质方面的差异较大，因此有必要对流化床焚烧污泥时污染物排放特性进行研究。本文详细研究了造纸、废水污泥在流化床中焚烧时污泥水份、运行床温及过量空气对NO。和SO。的排放特性及污泥N－＋NO。、S－SO。的转化率的影响，并对这两种性质差异较大的污泥焚烧时的NO。和502的生成特性进行了对比分析，取得了许多有价值的结果，为污泥流化床焚烧…     

On the Kauffman skein modules

 Let k be a subring of the field of rational functions in α, s which contains α ^±1 ,s ^±1 . Let M be a compact oriented 3-manifold, and let K(M) denote the Kauffman skein module of M over k. Then K(M) is the k-module freely generated by isotopy classes of framed links in M modulo the Kauffman skein relations. In the case of , the field of rational functions in α, s, we give a basis for the Kauffman skein module of the solid torus and a basis for the relative Kauffman skein module of the solid torus with two points on the boundary. We then show that K(S ¹ × S ² is freely generated by the empty link, i.e., . Received: 20 October 2001 / Revised version: 20 March 2002     

Liquid crystal lens with focus movable in focal plane

A liquid crystal lens with focus movable in the focal plane is reported. There are three electrodes in the cell. One electrode with a hole in the center is divided into four subelectrodes. The potential of each subelectrode is adjusted to produce a desired asymmetrical phase transformation resulting in off-axis movement of the focus. The potential of another electrode is adjusted to maintain the focus in the focal plane. Movements of the focus in three directions in the focal plane are demonstrated experimentally, and off-axis movement as large as approximately 800 μm is realized.     

Evaluation of compatibility in polymer blend systems by simultaneous DSC-FTIR measurement

The concept of crystallization dynamics method evaluating the miscibility of binary blend system including crystalline component was proposed. Three characteristic rates, nucleation, crystal growth rates (N*, G*) and growth rate of conformation (G _c*) were used to evaluate the miscibility of PVDF/at-PMMA and PVDF/iso-PMMA by the simultaneous DSC-FTIR. N*, G* and G _c* depended remarkably on both temperature and blend fraction (ϕ_PMMA) for PVDF/at-PMMA system, which indicated the miscible system. PVDF/iso-PMMA showed small ϕ_PMMA dependency of N*, G* and G _c*, was estimated the immiscible system. The ΔT/T _m⁰ values, corresponding to Gibbs energy required to attend the constant G* and G _c*, evaluated from G* and G _c* showed the good linear relationships with different slope. The experimental results suggested that the concentration fluctuation existed in PVDF/iso-PMMA system.     

Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

Singlewall carbon nanotubes covered with polystyrene nanoparticles by in‐situ miniemulsion polymerization

This work is to make carbon nanotubes dispersible in both water and organic solvents without oxidation and cutting nanotube threads. Polystyrene‐singlewall carbon nanotube (PS‐SWNT) composites were prepared with three different methods: miniemulsion polymerization, conventional emulsion polymerization, and mixing SWNT with PS latex. The two factors, crosslinking and surface coverage of PS are important factors for the mechanical and electrical properties, including dispersion states of SWNT in various solvents. The PS‐SWNT composite prepared via a conventional emulsion polymerization showed SWNT bundles entirely covered with PS, whereas the PS‐SWNT composite prepared via a miniemulsion polymerization showed SWNT partially covered with crosslinked PS nanoparticles. The method of mixing SWNTs with PS latex did not show the well dispersed state of carbon nanotubes because PS was not crosslinked and was dissolved in a solvent, and nanotubes separated from PS precipitated. So the PS nanoparticle‐SWNT composite had lower electrical resistance, and higher mechanical strength than the other composites made by the latter two methods. As the amount of SWNT increases, the bare surface area of SWNT increases and the electrical conductivity increases in the composite made by the miniemulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 573–584, 2006